Integrasi Programmable Logic Control Outseal Mega V.2 dengan NodeMCU ESP826 dengan menerapkan Internet of Things
DOI:
https://doi.org/10.26594/teknologi.v13i1.3868Abstract
Kemajuan dan Perkembangan Teknologi yang sangat pesat, sehingga di dalam dunia industri memerlukan alat bantu yang lebih modern dan bekerja secara otomatisasi. Pada saat ini dunia industri terutama mesin injection dan mesin press stamping produksi sudah menggunakan PLC namun belum bekerja secara otomatisasi dan belum terintegrasi dengan Internet of Thing’s. Untuk mempermudah aktivitas produksi maka penulis membuat hardware untuk mesin industri otomatisasi berbasis PLC Outseal Mega V.2 sebagai alternatif mesin industri tersebut dengan metode pendekatan kualitatif. Hardware yang dibuat dengan menggunakan NodeMCU ESP8266 dan modbus RTU serial RS485 dan Arduino Nano dan Blynk diinstalasi secara terstruktur dengan mekanisme adalah NodeMCU ESP8266 terintegrasi dengan modbus RTU serial RS485, sedangkan PLC Outseal Mega V.2 Slim, Arduino Nano terhubung dan terintegrasi dengan modbus RTU serial RS485 dan untuk Blynk NodeMCU ESP8266 terintegrasi dengan wifi. Setelah dirangkai selanjutnya dilakukan pengujian dengan jarak 15 meter PLC outseal Mega V.2 dapat dikontrol Blynknya berbasis Android sehingga integrasi PLC outseal Mega V.2 dapat digunakan dan bekerja di mesin injection maupu mesin pres stamping dapat bekerja secara otomatisasi.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Muhammad Makmun Effendi, Taufiq Khasanah, Nurhadi Sirojudin
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Please find the rights and licenses in Teknologi: Jurnal Ilmiah Sistem Informasi. By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
2. Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User/Public Rights
Register's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Register permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Register on distributing works in the journal and other media of publications. Unless otherwise stated, the authors are public entities as soon as their articles got published.
4. Rights of Authors
Authors retain all their rights to the published works, such as (but not limited to) the following rights;
Copyright and other proprietary rights relating to the article, such as patent rights,
The right to use the substance of the article in own future works, including lectures and books,
The right to reproduce the article for own purposes,
The right to self-archive the article (please read out deposit policy),
The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Register: Jurnal Ilmiah Teknologi Sistem Informasi).
5. Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Register will not be held liable for anything that may arise due to the author(s) internal dispute. Register will only communicate with the corresponding author.
6. Royalties
Being an open accessed journal and disseminating articles for free under the Creative Commons license term mentioned, author(s) aware that Register entitles the author(s) to no royalties or other fees.
7. Miscellaneous
Register will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Register's editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.
